After concluding a couple of weeks ago that I wasn’t going to be able to do HF here at home, I sold all my HF gear on eBay. I sold my Yaesu FTdx1200, my Buddipole and my Comet antenna analyzer. I also sold my Signalink (since it’s intended use was on HF).
I got pretty good prices for what I was selling. I actually sold the FTdx1200 for only $45 less than what I’d originally paid a few months back. So I’m officially out of the HF business.
After selling all that gear I decided to make a few more changes. I have a node radio (a Yaesu FT-7900R) that I use with my Allstar node. I’ve been running it on 5 watts, but even 5 watts is overkill just for my local use. And it’s certainly a much nicer rig than what is required for a node radio.
So there’s this guy that obtains used commercial radios and resells them along with the necessary control cables for use as node radios for both Allstar and IRLP. You can’t just spin a dial and put these radios on the frequency you choose. These radios must be programmed via special software for the frequency and tone you wish to operate on. And that’s part of the service he provides.
So I ordered a GE MVS commercial radio for use as my node radio. And I requested he set the transmit power level to 500mw. It will be very sweet to have a commercial radio as my node radio that only transmits with 1/2 watt. Should be about perfect. I talk to my node radio with my HT on it’s lowest power setting which also happens to be 500mw.
I had been toying with putting my current node radio (the FT-7900R) in the car, but decided against it. Instead, I bought a second Yaesu FT-60R for mobile use and put my FT-7900R up for sale on eBay.
My wife and I switch cars fairly frequently. So it is really better that I don’t have something permanently mounted in a vehicle. What I will have is a mag-mount antenna in each vehicle. And I’ll move my FT-60R back and forth as I switch vehicles.